Home>Products>Bearing Slewing Ring>35 1091 01 Rollix Slewing Ring Bearings
35 1091 01 Rollix Slewing Ring Bearings
category
Bearing Slewing Ring
Rollix 35 1091 01 Bearing SPECIFICATIONS
High Taizhou Fixing Pump Co., Ltd. 70.00 mm B Quality 4000 rpm Oil Speed Rating n2 35 1091 01 Rollix Slewing Ring Bearings. 70.000 mm d Competitive Bearing Slewing Ring Pricing. Accept Small Order. Easy and Fast Shipping.
- Rollix
35 1091 01
- 4000 rpm
- 70.00 mm
- 70.000 mm
- 2.00 mm
- 1.00 mm
- 190000 N
- 186000 N
- 150.0000 mm
- Taizhou Fixing Pump Co., Ltd.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Specifications for Bearing Slewing Ring
- 4000 rpm
- 70.00 mm
- 70.000 mm
- 2.00 mm
- 1.00 mm
- 190000 N
- 186000 N
- 150.0000 mm
- 3000 rpm
Rollix 35 1091 01 35 1091 01 Rollix Slewing Ring Bearings Technology
No. | Brand | H | K | h | U | R | s | A | E |
7 1140 13 | Rollix | - | - | 185 mm | - | - | - | - | - |
66183L | Franke | - | - | - | - | - | - | - | - |
66395L | Franke | - | - | - | - | - | - | - | - |
66176L | Franke | - | - | - | - | - | - | - | - |
68480A | Franke | - | - | - | - | - | - | - | - |
2 1715 | Rollix | - | - | - | - | - | - | - | - |
75041A | Franke | - | - | 56.356 mm | - | - | - | - | - |
24 0941 01 | Rollix | - | - | - | - | - | - | - | - |
73093L | Franke | 112 mm | - | - | - | - | - | - | - |
69704L | Franke | - | - | - | - | - | - | - | - |
73119L | Franke | - | - | - | - | - | - | - | - |
33 1091 01 | Rollix | - | - | - | - | - | - | - | - |
75038A | Franke | - | - | - | - | - | - | - | - |
75078A | Franke | - | - | 185 mm | - | - | - | - | - |
73101L | Franke | - | - | 232.5 mm | - | - | - | - | - |
31 1091 01 | Rollix | - | - | 3 mm | - | - | - | - | - |
1 2040 03 | Rollix | - | 5 mm | - | - | - | - | - | - |
73022L | Franke | - | 12 mm | - | - | - | - | - | - |
73059L | Franke | - | - | - | - | - | - | - | - |
68472A | Franke | 95 mm | - | - | - | - | - | - | - |
66151L | Franke | - | - | - | - | - | - | - | - |
73040L | Franke | - | - | - | - | - | - | - | - |
66394L | Franke | - | - | - | - | - | - | - | - |
75036A | Franke | - | - | - | - | - | - | - | - |
73004L | Franke | - | - | - | - | - | - | - | - |
75032A | Franke | - | - | - | - | - | - | - | - |
66397L | Franke | - | - | - | - | - | - | - | - |
73039L | Franke | - | - | - | - | - | - | - | - |
23 1091 01 | Rollix | - | - | - | - | - | - | - | - |
1 1595 | Rollix | - | - | - | - | - | - | - | - |
66391L Franke Slewing Ring Bearings | Basic Dynamic Radial Load Rating C:88000 N; Accessories:One Shield; Grease Speed Rating Open/Shielded n1:4400 rpm; d:50.000 mm; D:130.0000 mm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:71000 N; B:31.00 mm; Oil Speed Rating Open/Shielded n2:5400 rpm; |
73095L Franke Slewing Ring Bearings | F:547 mm; s max.:16 mm; da max.:536 mm; Reference speed:630 r/min; db min.:552 mm; Limiting speed:1100 r/min; r1,2 min.:7.5 mm; Limiting value e:0.3; D1 ≈:699 mm; Calculation factor kr:0.21; Basic dynamic load rating C:5940 kN; d:480 mm; D:790 mm; Basic static load rating C0:10800 kN; B:248 mm; Fatigue load limit Pu:800 kN; da min.:512 mm; Mass bearing:507 kg; ra max.:6 mm; Da max.:758 mm; |
73093L Franke Slewing Ring Bearings | Recommended diameter for attachment bolts, mm G:10 mm; A5:20.5 mm; Db1:58 mm; L:60.5 mm; T:37.3 mm; s1:18.3 mm; d:19.05 mm; Rα:45 °; J:90 mm; B4:4.5 mm; H:112 mm; Basic static load rating C0:6.55 kN; Basic dynamic load rating C:12.7 kN; B:25.5 mm; R1:20 mm; Mass bearing unit:0.43 kg; Recommended tightening torque for grub screw:4 N·m; J6:74 mm; GN:1/4-28 SAE-LT; A1:11 mm; |
73053L Franke Slewing Ring Bearings | G:M 30x2; dk:40.7 mm; d:30 mm; Mass rod end:0.9 kg; r1 min.:0.6 mm; C1 max.:20 mm; α:6 °; d2 max.:75 mm; Basic dynamic load rating C:93 kN; h:110 mm; Specific dynamic load factor K:150 N/mm²; l1 min.:65 mm; Material constant KM:330; l2 max.:149 mm; B:22 mm; Basic static load rating C0:81.5 kN; l7 min.:34 mm; |
75013A Franke Slewing Ring Bearings | Sealed Speed Rating n3:13000 rpm; Basic Dynamic Radial Load Rating C:7800 N; Accessories:Seal & Snap-Ring; Grease Speed Rating Open/Shielded n1:19000 rpm; Grease Speed Rating n1:19000 rpm; Oil Speed Rating n2:24000 rpm; B:11.00 mm; Fillet Radius ra:0.64 mm; Basic Static Radial Load Rating Co:3250 N; Oil Speed Rating Open/Shielded n2:24000 rpm; D:35.0000 mm; d:15.000 mm; |
66192L Franke Slewing Ring Bearings | Basic dynamic load rating C:150 kN; Material constant KM:330; G:M 42x3; dk:53 mm; l5 ≈:25 mm; d:40 mm; l7 min.:40 mm; r1 min.:0.6 mm; α:6 °; Mass rod end:2.3 kg; d4 ≈:58 mm; Basic static load rating C0:166 kN; l3 min.:65 mm; Specific dynamic load factor K:150 N/mm²; w:50 mm; B:28 mm; C1 max.:24 mm; l4 max.:194 mm; d2 max.:94 mm; h1:145 mm; |
75017A Franke Slewing Ring Bearings | Ca:137.82 mm; Stabilizing ring:SR-40-34; P90°:218 kN; H2:85.725 mm; da:182.563 mm; Mass pillow block:210 kg; Initial grease fill:2154.6 g; L:749.3 mm; Cap bolt:4 x 7/8-9 UNC; S:4.763 mm; P60°:364 kN; R1:122.237 mm; P120°:136 kN; A2:358.775 mm; J1:127 mm; Taconite seal:TER 159; H:422.275 mm; Eye bolt:2 x 3/8-16 UNC; Cap bolt, SAE grade:5; H1:209.55 mm; |
25 1091 01 Rollix Slewing Ring Bearings | Lubricant:Regular relubricatio; Material constant KM:330; Da max.:153.3 mm; da max.:111.2 mm; D:160 mm; Design (sliding contact surface combination):Steel/steel, heavy-d; B:85 mm; r1 min.:1 mm; C:55 mm; Basic static load rating C0:3250 kN; α:13 °; d:100 mm; b1:11.5 mm; b:11.5 mm; da min.:108.1 mm; M:5 mm; Mass plain bearing:5.9 kg; r2 min.:1 mm; Basic dynamic load rating C:655 kN; Specific dynamic load factor K:100 N/mm²; |
73100L Franke Slewing Ring Bearings | Basic Static Radial Load Rating Co:120 N; Width Plain B:4.4 mm; Sealed Speed Rating n3:52000 rpm; Basic Dynamic Radial Load Rating C:312 N; Fillet Radius ra:0.30 mm; d:3.200 mm; Oil Speed Rating Open/Shielded n2:91000 rpm; D:12.7000 mm; Accessories:Two Shields; Grease Speed Rating Open/Shielded n1:75000 rpm; Shielded or Sealed B1:4.4 mm; |
1 2040 03 Rollix Slewing Ring Bearings | b1:9.4 mm; d:280 mm; das:310 mm; Limiting speed:850 r/min; Calculation factor kr:0.5; ra max.:3 mm; D1 ≈:372 mm; rb max.:3 mm; B:190 mm; Basic dynamic load rating C:2920 kN; Reference speed:670 r/min; d1 ≈:318 mm; r3,4 min.:4 mm; Basic static load rating C0:5300 kN; D:420 mm; K:5 mm; s max.:10 mm; Da max.:404 mm; Mass bearing:90.5 kg; Fatigue load limit Pu:520 kN; |
75034A Franke Slewing Ring Bearings | H2:44.45 mm; RG:3/8 NPT; Da:170 mm; P120°:33.8 kN; H1:107.95 mm; End plug (suffix Y):EPR 8; A2:233.363 mm; Taconite seal (dc shaft position):TER 60; J max.:320.675 mm; PG:1/4 NPT; R1:63.5 mm; ba:46.038 mm; P60°:92.5 kN; da:80 mm; Appropriate attachment bolt size G:0.625 in; Pa:23.6 kN; Cap bolt:2 x 3/4-10 UNC; Cap bolt recommended tightening torque:515.2 N·m; P150°:30.7 kN; P90°:55.6 kN; |
66160L Franke Slewing Ring Bearings | d1:134.938 mm; Mass adapter sleeve assembly:7.25 kg; B:24.867 mm; d:150 mm; G:149.555 mm; d3 max.:195.402 mm; B1:107.467 mm; Sleeve:S 30x5.5/16; Hydraulic nut:HMVC 30E; Threads per inch:12; B4:28.575 mm; |
73137L Franke Slewing Ring Bearings | d:15 mm; Specific dynamic load factor K:10 N/mm²; Coefficient of friction µ min.:0.05; Tolerance shaft:h8; B:25 mm; Coefficient of friction µ max.:0.1; Tolerance housing:H7; Specific static load factor K0:20 N/mm²; D:19 mm; Mass bushing:0.017 kg; Permissible sliding velocity v min.:0.25 m/s; Permissible sliding velocity v max.:5 m/s; |
73041L Franke Slewing Ring Bearings | Basic Static Radial Load Rating Co:52000 N; Grease Speed Rating Open/Shielded n1:5300 rpm; Basic Dynamic Radial Load Rating C:68200 N; B:27.00 mm; d:40.000 mm; Fillet Radius ra:2.00 mm; D:110.0000 mm; Oil Speed Rating Open/Shielded n2:6500 rpm; Accessories:Two Shields & Snap-R; |
66398L Franke Slewing Ring Bearings | Calculation factor Y0:0.8; Basic dynamic load rating C:108 kN; d:66.675 mm; Da min.:98 mm; Dimension series:395; Cb min.:3 mm; a:20.871 mm; Db min.:105 mm; rb max.:1.3 mm; Basic static load rating C0:118 kN; T:22 mm; Calculation factor Y:1.5; Mass bearing:0.79 kg; B:21.996 mm; Fatigue load limit Pu:13.4 kN; da max.:77 mm; Calculation factor e:0.4; D:110 mm; r3,4 min.:1.3 mm; Ca min.:4 mm; |
68318B Franke Slewing Ring Bearings | S:4.763 mm; Mass pillow block:89.8 kg; Cap bolt recommended tightening torque:813.5 N·m; PG:1/4 NPT; R1:87.313 mm; End plug (suffix Y):EPR 16; RG:3/4 NPT; ba:61.119 mm; Housing:SSAFS 228; da:140 mm; P150°:105 kN; P60°:301 kN; Cap bolt:7/8-9 UNC; Ca:77.8 mm; R2:38.1 mm; Da:250 mm; H:298.45 mm; dc:134.938 mm; Cap bolt, SAE grade:8; P180°:127 kN; |
35 1091 01 Rollix Slewing Ring Bearings Video
Rollix 35 1091 01 INTERCHANGE
Bearing Slewing Ring Part series 35 1091 01 is a potential replacement for these common bearing part numbers:
35 1091 01
35 1091 01
35 1091 01
35 1091 01
35 1091 01
35 1091 01
35 1091 01
35 1091 01
Contact Us
- Taizhou Fixing Pump Co., Ltd.
- Address498 Feague Court, Duburn, AL 39646, U.S.A.
- Phone(Working Time)+1-598-289-5884
- Fax
Bearing Slewing Ring CATEGORIES
- Atos Pump
- Daikin Pump
- Parker Pump
- Rexroth Pump
- Toko Pump
- Vickers Pump
- Yuken Pump
- Large Slewing Bearings
- Slewing Ring Bearings
- Kaydon Slewing Bearing
- Bearing Slewing Ring
- Super Precision Bearings
- Super Precision Angular Contact Bearings
- Super Precision Bearing
- Slewing Ring
- Tapered Roller Bearing Assembly
- Four-Row Tapered Roller Bearing
- Spherical Roller Bearings
- Cylindrical Roller Bearings
- Double Row Tapered Thrust Roller Bearings
- Railway Rolling Spherical Roller Bearings