Home>Products>Bearing Slewing Ring>66179L Franke Slewing Ring Bearings
66179L Franke Slewing Ring Bearings
category
Bearing Slewing Ring
Franke 66179L Bearing SPECIFICATIONS
With over 10170 full-service stores, our 66179L Franke Slewing Ring Bearings inventory is extensive and our parts are priced right. within 24 hours. This helps Taizhou Fixing Pump Co., Ltd. you 2600 rpm Oil Speed Rating Open/Shielded n2 maximize your Two Shields Accessories productivity by saving time and your hard-earned dollars.
- Franke
66179L
- Two Shields
- 216000 N
- 2600 rpm
- 179000 N
- 230.0000 mm
- 2.50 mm
- 2100 rpm
- 40.00 mm
- Taizhou Fixing Pump Co., Ltd.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Specifications for Bearing Slewing Ring
- Two Shields
- 216000 N
- 2600 rpm
- 179000 N
- 230.0000 mm
- 2.50 mm
- 2100 rpm
- 40.00 mm
- 130.000 mm
Franke 66179L 66179L Franke Slewing Ring Bearings Technology
No. | Brand | H | K | h | U | R | s | A | E |
1 2202 | Rollix | 257.175 mm | - | 46.831 mm | - | - | - | - | - |
73087L | Franke | - | - | - | - | - | - | - | - |
73010L | Franke | - | - | - | - | - | - | - | - |
75043A | Franke | - | - | - | - | - | - | - | - |
2 2618 | Rollix | - | - | - | - | - | - | - | - |
27 1091 01 | Rollix | - | - | - | - | - | - | - | - |
66146L | Franke | 213.519 mm | - | - | - | - | 41.275 mm | 89.694 mm | - |
75082A | Franke | - | - | - | - | - | 1.4 mm | - | mm |
75040A | Franke | - | - | - | - | - | - | - | - |
66178L | Franke | - | - | - | - | - | - | - | - |
75036A | Franke | - | - | - | - | - | - | - | - |
7 1140 13 | Rollix | - | - | 185 mm | - | - | - | - | - |
35 0941 01 | Rollix | 400.05 mm | - | 57.15 mm | - | - | - | - | - |
24 0941 01 | Rollix | - | - | - | - | - | - | - | - |
66399L | Franke | - | - | - | - | - | - | - | - |
39 1091 01 | Rollix | 192.484 mm | - | 38.1 mm | - | - | - | - | - |
73137L | Franke | - | - | - | - | - | - | - | - |
66141L | Franke | - | - | - | - | - | - | - | - |
6 2242 | Rollix | - | - | - | - | - | - | - | - |
75063A | Franke | - | - | - | - | - | - | - | - |
75062A | Franke | - | - | - | - | - | - | - | - |
75021A | Franke | - | - | - | - | - | - | - | - |
73107L | Franke | - | 7.5 mm | - | - | - | - | - | - |
66154L | Franke | - | - | - | - | - | - | - | - |
73101L | Franke | - | - | 232.5 mm | - | - | - | - | - |
2 256 | Rollix | 242 mm | - | - | - | - | - | - | - |
73064L | Franke | 142.875 mm | - | - | - | - | 32.941 mm | 68.263 mm | - |
2 1415 | Rollix | - | - | - | - | - | - | - | - |
73065L Franke Slewing Ring Bearings | Sealed Speed Rating n3:4500 rpm; D:100.0000 mm; Accessories:Shield & Seal & Snap; B:39.70 mm; Grease Speed Rating n1:4500 rpm; Basic Static Radial Load Rating Co:80000 N; Oil Speed Rating n2:6000 rpm; d:45.000 mm; Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating C:80900 N; |
39 1091 01 Rollix Slewing Ring Bearings | Initial grease fill:286.33 g; H1:101.6 mm; N1:19.05 mm; P180°:42.3 kN; RG:3/8 NPT; PG:1/8 NPT; J max.:295.275 mm; h:38.1 mm; A1:98.425 mm; H:192.484 mm; Appropriate attachment bolt size G:0.625 in; Max. speed for Taconite seal:950 r/min; P60°:101 kN; Cap bolt recommended tightening torque:149.1 N·m; Pa:8.1 kN; Cap bolt, SAE grade:5; Stabilizing ring:2 x SR-1518; J min.:263.525 mm; Da:160 mm; |
73101L Franke Slewing Ring Bearings | d:230 mm; Coefficient of friction µ max.:0.15; h:232.5 mm; B:250 mm; Specific static load factor K0:45 N/mm²; Mass bushing:16.6 kg; Permissible sliding velocity v max.:0.5 m/s; Tolerance housing:H7; Coefficient of friction µ min.:0.08; Permissible sliding velocity v min.:0 m/s; D:250 mm; α:124 °; a:12.5 mm; Specific dynamic load factor K:25 N/mm²; Tolerance shaft:e7; |
26 1091 01 Rollix Slewing Ring Bearings | P60°:121 kN; R2:27.94 mm; Pa:8.27 kN; N1:22.225 mm; P90°:72.5 kN; A1:98.425 mm; H1:101.6 mm; Mass pillow block:21.5 kg; R1:60.325 mm; Stabilizing ring:2 x SR-1615; PG:1/8 NPT; Housing:SAF 615; J max.:295.275 mm; Ca:64.795 mm; Taconite seal:TER 38; L:349.25 mm; RG:3/8 NPT; Initial grease fill:286.33 g; J min.:263.525 mm; A2:223.838 mm; |
73107L Franke Slewing Ring Bearings | Da max.:140 mm; Calculation factor e:0.43; Basic static load rating C0:850 kN; Basic dynamic load rating C:606 kN; Calculation factor Y0:1.6; Limiting speed:4300 r/min; r3,4 min.:2 mm; 2B:98 mm; Ca min.:7 mm; T:98 mm; Reference speed:2800 r/min; d:85 mm; ra max.:2 mm; Mass bearing pair:7.3 kg; Calculation factor Y1:1.6; Fatigue load limit Pu:96.5 kN; K:7.5 mm; r5 min.:0.6 mm; b:10 mm; D:150 mm; |
75058A Franke Slewing Ring Bearings | Calculation factor A:0.0202; Calculation factor X:0.6; Mass bearing:1.05 kg; Calculation factor e:0.95; D1 ≈:81.2 mm; d:45 mm; Calculation factor Y0:0.58; Basic dynamic load rating C:100 kN; r1,2 min.:1.5 mm; Calculation factor Y1:0.66; Basic static load rating C0:83 kN; Fatigue load limit Pu:3.55 kN; a:51 mm; da min.:54 mm; Da max.:91 mm; ra max.:1.5 mm; B:25 mm; d1 ≈:58 mm; D:100 mm; |
2 204 Rollix Slewing Ring Bearings | Da max.:118 mm; Calculation factor X:0.63; d:60 mm; D:130 mm; da max.:73 mm; D2 ≈:117.5 mm; Basic static load rating C0:95 kN; Fatigue load limit Pu:4.05 kN; a:78 mm; Mass bearing:2.8 kg; d2 ≈:73.4 mm; Reference speed:5600 r/min; r1,2 min.:2.1 mm; da min.:72 mm; Limiting speed:5000 r/min; Calculation factor Y2:1.24; ra max.:2 mm; Basic dynamic load rating C:127 kN; Calculation factor kr:0.07; |
75036A Franke Slewing Ring Bearings | Basic static load rating C0:143 kN; Ea min.:55 mm; Fatigue load limit Pu:17 kN; B:4.2 mm; d:50 mm; Mass bearing with a centring flange:0.049 kg; Reference speed:2400 r/min; Eb max.:68 mm; D:73 mm; D1:58 mm; Limiting speed:5000 r/min; B1:4.5 mm; Basic dynamic load rating C:28.5 kN; Dw:3 mm; |
6 1390 03 Rollix Slewing Ring Bearings | Specific static load factor K0:45 N/mm²; Permissible sliding velocity v max.:0.5 m/s; Specific dynamic load factor K:25 N/mm²; Coefficient of friction µ max.:0.15; α:124 °; B:200 mm; D:230 mm; a:10 mm; Mass bushing:12.2 kg; h:212.5 mm; Coefficient of friction µ min.:0.08; Permissible sliding velocity v min.:0 m/s; Tolerance shaft:e7; Tolerance housing:H7; d:210 mm; |
73033L Franke Slewing Ring Bearings | Bearing (basic designation):23060 K; P0°:4000 kN; ba min.:118 mm; P55°:5000 kN; Q120°:2860 kN; P120°:1800 kN; Q180°:1430 kN; Q150°:1650 kN; Locating ring:2 x FRB 25/460; N4 max.:20 mm; bc:154.5 mm; A:315 mm; Mass housing:252 kg; da:280 mm; A1:280 mm; P180°:2000 kN; L:790 mm; H:551 mm; N:50 mm; ba max.:149 mm; |
73015L Franke Slewing Ring Bearings | d:25.000 mm; D:52.0000 mm; Basic Static Radial Load Rating Co:4400 N; Oil Speed Rating n2:14000 rpm; Grease Speed Rating n1:11000 rpm; Basic Dynamic Radial Load Rating C:16800 N; B:18.00 mm; Fillet Radius ra:1.00 mm; |
75017A Franke Slewing Ring Bearings | Ca:137.82 mm; Stabilizing ring:SR-40-34; P90°:218 kN; H2:85.725 mm; da:182.563 mm; Mass pillow block:210 kg; Initial grease fill:2154.6 g; L:749.3 mm; Cap bolt:4 x 7/8-9 UNC; S:4.763 mm; P60°:364 kN; R1:122.237 mm; P120°:136 kN; A2:358.775 mm; J1:127 mm; Taconite seal:TER 159; H:422.275 mm; Eye bolt:2 x 3/8-16 UNC; Cap bolt, SAE grade:5; H1:209.55 mm; |
73136L Franke Slewing Ring Bearings | J:950 mm; Q120°:4200 kN; Initial grease fill, 20%:8.5 kg; Q180°:2100 kN; d2:615 mm; P0°:7000 kN; N4 max.:35 mm; ba max.:218 mm; s:30 mm; Pa:2200 kN; Labyrinth seal:2 x TS 500; Eye bolt, size:2 x M 42; Lock washer:MS 3088; Locating ring:2 x FRB 21.5/650; db:470 mm; bc:223.5 mm; ATK:560 mm; Initial grease fill, 40%:14.5 kg; P90°:4200 kN; P180°:3500 kN; |
66399L Franke Slewing Ring Bearings | Mass rod end:0.68 kg; Specific dynamic load factor K:100 N/mm²; d4 max.:30 mm; dk:35.5 mm; α:7 °; N max.:63 mm; Basic dynamic load rating C:48 kN; h1:68 mm; l7 min.:30 mm; r1 min.:0.6 mm; C1 max.:17 mm; Basic static load rating C0:73.5 kN; N1 max.:17 mm; d:25 mm; Tightening torque bolt with internal hexagon:25 N·m; Size bolt with internal hexagon:M 8; B:20 mm; Material constant KM:330; |
28 1091 01 Rollix Slewing Ring Bearings | Tolerance housing:H7; a:10 mm; B:200 mm; Coefficient of friction µ max.:0.15; Specific static load factor K0:45 N/mm²; Coefficient of friction µ min.:0.08; d:140 mm; Tolerance shaft:e7; h:142 mm; Specific dynamic load factor K:25 N/mm²; Permissible sliding velocity v min.:0 m/s; Mass bushing:8.5 kg; Permissible sliding velocity v max.:0.5 m/s; α:124 °; D:160 mm; |
75039A Franke Slewing Ring Bearings | Da max.:580 mm; ra max.:4 mm; D1 ≈:524 mm; K:12 mm; Calculation factor Y0:2.2; Calculation factor Y1:2.3; da min.:371 mm; d2 ≈:436 mm; Fatigue load limit Pu:490 kN; Calculation factor e:0.3; d:360 mm; b:22.3 mm; Basic static load rating C0:6950 kN; Mass bearing:215 kg; r1,2 min.:5 mm; B:192 mm; D:600 mm; Reference speed:750 r/min; Calculation factor Y2:3.4; Basic dynamic load rating C:4515 kN; |
66179L Franke Slewing Ring Bearings Video
Franke 66179L INTERCHANGE
Bearing Slewing Ring Part series 66179L is a potential replacement for these common bearing part numbers:
66179L
66179L
66179L
66179L
66179L
66179L
66179L
66179L
Contact Us
- Taizhou Fixing Pump Co., Ltd.
- Address498 Feague Court, Duburn, AL 39646, U.S.A.
- Phone(Working Time)+1-598-289-5884
- Fax
Bearing Slewing Ring CATEGORIES
- Atos Pump
- Daikin Pump
- Parker Pump
- Rexroth Pump
- Toko Pump
- Vickers Pump
- Yuken Pump
- Large Slewing Bearings
- Slewing Ring Bearings
- Kaydon Slewing Bearing
- Bearing Slewing Ring
- Super Precision Bearings
- Super Precision Angular Contact Bearings
- Super Precision Bearing
- Slewing Ring
- Tapered Roller Bearing Assembly
- Four-Row Tapered Roller Bearing
- Spherical Roller Bearings
- Cylindrical Roller Bearings
- Double Row Tapered Thrust Roller Bearings
- Railway Rolling Spherical Roller Bearings